Plastic Bonding Kit - 12gm Super Glue

SKU:
SWM000243P01V0001
Availability:
Available for Fast Dispatch.

Bulk discount rates

All Bulk Prices Below Are Quoted Including GST.

Buy 2 - 4 and pay only $42.55 each
Buy 5 or above and pay only $38.02 each
  • Info Image for our Plastic Bonding Kit - 12gm Super Glue; VA 8406 Super Glue w/ CA Primer for Polyolefins
  • VA 8406 Cyanoacrylate Adhesive in use.
  • Applying our Super Glue Primer to Nitrile O Ring Cord to make O Rings
  • Bond even the most difficult types of plastic with our professional-quality plastic bonding kit. Each kit contains a specially selected industrial grade super glue and our specialised Contact Primer for Polyolefins.
$44.72
Inc. GST
$40.65
Ex. GST
Frequently bought together:

Description

  • Bond even the hardest plastics with our German-Engineered VA 8406 Super Glue and CA Primer.
  • Can be used to stick polyethylene, polypropylene and even PTFE.
  • Professional grade glue and primer manufactured by Weicon in Germany.

Depending on the type of plastic you are working with, bonding can be a real problem. For higher surface energy grades like ABS or Nylon, a good quality super glue will usually work without the need for a primer. However, when you’re working with low surface energy grades, things become a little more complicated.

To address this issue, we’ve put together our Plastic Bonding Kit. Each kit contains a tube of our VA 8406 Industrial-Grade Super Glue and a 10ml Bottle of our renowned Contact Primer for Polyolefins.

By applying the primer to the surface of the plastic, you will be changing its surface structure. This will allow the glue to bond and achieve good, strong adhesion where it would otherwise have been impossible.

Applications for our Plastic Bonding Kit.

Our Plastic Bonding Kit will allow you to create high strength, long lasting bonds between a wide range of plastics and other materials. Just some of the materials now able to be bonded include…

  • Polypropylene (PP)
  • Polyethylene (PE) – Include Low and High-Density Grades (LDPE and HDPE as well as UHMWPE).
  • Silicone Rubber
  • PTFE (Polytetrafluoroethylene) (aka Teflon®)
  • EPDM Rubber (both Sulphur and Peroxide Cured).
  • Thermoplastic Elastomers.
  • PVC (Polyvinyl Chloride)
  • ABS
  • Polycarbonate (aka Lexan®)
  • Nylon
  • Acetal
  • Polyester Resin Based Materials.
  • Phenolic Resin Based Materials (e.g. Bakelite).
  • Rubber Materials (e.g. Neoprene, Natural, Nitrile, Viton).
  • Glass
  • Ceramic
  • Metals

Dowloands & Resources

Technical Details for our VA 8406 Industrial Super Glue

Figures given in the table below do not include the use of the primer. Strength will only increase when the primer is used in conjunction with this glue.

Colour Colourless / Clear
Initial Adhesion on Nora Test Rubber < 5 Seconds
Full Cure 24 Hours
Viscosity (20°C Brookfield) 20-50 MPa
Continuous Temperature Resistance -50°C to +80°C
Short-Term Temperature Resistance +100°C
Squatting Temperature 150°C
Max. Gap Covering Power 0.1mm
Ester Type Ethyl
Potable Water ISEGA Recognised as an Adhesive for Food Technology
Food Applications ISEGA Recognised as an Adhesive for Food Technology
Shear Strength Adhesion to Sand-Blasted Steel 22 N/mm² (DIN 53283)
Shear Strength Adhesion to Rigid PVC 14 N/mm² (DIN 53283)
Shear Strength Adhesion to ABS 13 N/mm² (DIN 53283)
Shear Strength Adhesion to NBR >8 N/mm² (exceeds strength of rubber) (DIN 53283)

 

Material Compatability

Metal Compatible
Plastic Highly Compatible (High Surface Energy and Medium Surface Energy Plastics Only)
Rubber Highly Compatible
EPDM Rubber Highly Compatible
Balsa Wood Not Compatible
Glass / Ceramic Compatible
Leather Not Compatible

 

View AllClose

Additional Information

Colour:
Transparent
One Part / Two Part:
Two Part
Superglue Ester Type:
Ethyl
Superglue General Viscosity:
Low (Thinner)
Viscosity:
20 - 50 mPa·s (at 20ºC Brookfield)
Specific Gravity:
1.05 g/cm³
Minimum Continuous Temperature:
-50°C
Maximum Continuous Temperature:
80°C
Short-Term Temperature Resistance:
100°C
Initial Adhesion:
2-10 Seconds on Sand-Blasted Aluminium
Initial Adhesion:
<5 Seconds on Nora Test Rubber
Initial Adhesion:
2-10 Seconds on Rigid PVC
Full Cure Time:
24 Hours
Max. Gap Covering Power:
0.1mm
General Adhesion to Metals:
Compatible
General Adhesion to Plastics (except LSE Types):
Highly Compatible with Primer even for Low Surface Energy Types.
General Adhesion to Wood:
Compatible
General Adhesion to Glass, Ceramics:
Highly Compatible with Primer
General Adhesion to Stone:
Not Compatible
General Adhesion to Rubbers:
Highly Compatible
Dielectric Strength:
25 kV/mm
Container Size:
12gm
Container Size:
10ml
Food Grade / Potable Water Approvals?:
No
View AllClose