15NB Table D & E BS3063 Full Face Gasket, 3mm NRI

SKU: SWM000005P04V0001
Availability: Cut to Order, Ships in 2-3 W/Days.
$0.96
INC. GST
$0.87
EX. GST

BULK DISCOUNT RATES

All Bulk Prices Below Are Quoted Including GST.
Buy 10 - 24 and pay only $0.85 each
Buy 25 - 49 and pay only $0.81 each
Buy 50 or above and pay only $0.78 each
  • Economical gaskets for sealing at low pressures & temperatures.
  • Cut in our Australian factory to the precise size requirements of BS 3063.
  • Full range of standard flange tables available. Custom size gaskets also available upon request.

Natural Rubber Insertion (NRI) Flange Gaskets are often used in low temperature and low-pressure sealing.

Cut in our Australian factory from our Natural Rubber Insertion sheet, the gaskets featured on this page are all designed to suit BS 3063 Table D and/or Table E flanges.

Widely used in many different industries, Insertion Rubber Gaskets are suitable for sealing applications where temperatures are between 0°C and 70°C. They are often used for hydro-testing or permanent, low pressure flange sealing because of their economic nature.

For more information on this material, please consult our Natural Insertion Rubber Technical Data Sheet. For more info on the gaskets, read on.

Flange Gaskets to Suit BS 3063 Size Info.

Gaskets made to suit this specification are all cut to suit BS 3063 Flanges in either Table D or Table E configurations (the two most common). In some pipe nominal bores (e.g. 15NB, 80NB) there’s no difference in gasket size between Table D or Table E (the gasket fits both). In others, there are differences in number of holes or hole diameter.

Where there are differences between Table D and Table E; both are offered. Where there are no differences, a single gasket is listed here which will suit both. The sizing tables below provide more information on which nominal bores use the same gasket and which require their own size.

All the gaskets listed below are full face gaskets. These are so-named because they take up the full flange face and cover the bolt holes. Both ring and full-face gaskets can be used on these flanges depending on particular requirements and user preferences.

Full Face Flange Gaskets to suit BS 3063 Table D and Table E Size Info Table.

BS 3063 Table D Rubber Gaskets Sizing.

All Dimensions below are given in millimeters (mm).

Flange Nominal
Bore
Gasket OD Gasket ID Number of
Holes
Hole
Diameter
PCD Matches
Table
15NB 95 21 4 14 67 E
20NB 102 27 4 14 73 E
25NB 114 34 4 14 83 E
32NB 121 43 4 14 87 E
40NB 133 48 4 14 98 E
50NB 152 60 4 19 114 E
65NB 165 76 4 19 127 E
80NB 184 89 4 19 146 E
90NB 203 102 4 19 165 -
100NB 216 114 4 19 178 -
125NB 254 140 8 19 210 E
150NB 279 168 8 19 235 -
200NB 337 219 8 19 292 -
250NB 406 273 8 22 356 -
300NB 457 324 12 22 406 -
350NB 527 381 12 25 470 E
400NB 578 432 12 25 521 E
450NB 641 483 12 25 584 -
500NB 705 533 16 25 641 E
600NB 825.5 635 16 29 756 -

BS 3063 Table E Rubber Gaskets Sizing.

All Dimensions below are given in millimeters (mm).

Flange Nominal
Bore
Gasket OD Gasket ID Number of
Holes
Hole
Diameter
PCD Matches
Table
15NB 95 21 4 14 67 D
20NB 102 27 4 14 73 D
25NB 114 34 4 14 83 D
32NB 121 43 4 14 87 D
40NB 133 48 4 14 98 D
50NB 152 60 4 19 114 D
65NB 165 76 4 19 127 D
80NB 184 89 4 19 146 D
90NB 203 102 8 19 165 -
100NB 216 114 8 19 178 -
125NB 254 140 8 19 210 D
150NB 279 168 8 22 235 -
200NB 337 219 8 22 292 -
250NB 406 273 12 22 356 -
300NB 457 324 12 25 406 -
350NB 527 381 12 25 470 D
400NB 578 432 12 25 521 D
450NB 641 483 16 25 584 -
500NB 705 533 16 25 641 D
600NB 825.5 635 16 32 756 -
Colour Black
Insertion Cotton
Polymer NR/SBR (Natural Rubber / Styrene Butadiene Rubber)
Hardness 60 Shore A (+/- 5) Durometer
Continuous Operating Temperature 0°C to 70°C
Elongation at Break 300%
Tear Strength 12 N / mm
Specific Gravity 1.55
Potable Water No
Food Grade No
Abrasion Resistance High
Hydrocarbon and Fuel Resistance Low
Tearing Resistance High
UV / Sunllight Resistance Medium
SKU SWM000005P04
Brand Gaskaseal