Industrial Cork Sheet (Rubber Bonded) 3mm x 1040mm x 1270mm

SKU:
SWM000007B01V0003
Availability:
Available for Fast Dispatch

Bulk discount rates

All Bulk Prices Below Are Quoted Including GST.

Buy 5 - 9 and pay only $35.89 each
Buy 10 - 19 and pay only $33.08 each
Buy 20 - 39 and pay only $30.23 each
Buy 40 or above and pay only $28.99 each
  • Info Image for our Industrial Cork Sheet (Rubber Bonded) 3mm x 1040mm x 1270mm; Quality Cork Gasket Sheet For Oils, Lubricants & More.
  • Full sheets of our Industrial Cork; a compressible, flexible and highly effective cork used for sealing and gaskets. Manufactured with an SBR binder, this grade is economical and very good at sealing oils in applications with low to medium bolt loads.
  • MR31 Cork Sheet available in a selection of sizes and thicknesses.
  • Close up view of our TS1521 / MR31 Cork Sheet
$44.80
Inc. GST
$40.73
Ex. GST
Frequently bought together:

Description

  • Good resistance to oils and most common lubrication fluids.
  • Withstands temperatures up to 110°C.
  • Rubber binder allows for excellent gasket conformability at low and medium pressure.

Industrial Cork Sheet TS1521 is a high quality type of cork commonly used for the manufacture of seals and gaskets. This economical grade of cork is manufactured from cork granules that are bound using an SBR (styrene butadiene rubber) binder. The result is an industrial quality cork sheet which is able to seal well at relatively low gasket seating stress due to low or medium bolt loads.

Our Industrial Cork Sheet TS1521 exhibits excellent flexibility and compressibility as well as very good resilience and recovery. This leads to it being able to perform long-term, even in demanding applications. This rubberised cork withstands temperatures up to 110°C and is not affected by most common types of lubrication fluids. It is, however, not suitable for use sealing unleaded petrol or low sulphur diesel fuel.

Compared to our premium grade cork sheet, our industrial grade has a lower density and reduced hardness. It also handles slightly lower temperatures but is more economical.

Applications for our Industrial Grade Cork Sheets

  • Industrial gaskets and seals.
  • Wear resistant strips.
  • Automotive and marine gaskets.
  • Pump, valve and pipe gaskets.
  • Anti-vibration mats and pads.
  • Sealing strips and liners for metal joints.
  • High density cork noticeboards.

Dowloands & Resources

 

MR31 / TS1521 Cork Specifications.

Colour Brown
Continuous Operating Temperature -30°C to +110°C
Binder SBR (Styrene Butadiene Rubber)
Oil Resistant Yes
Fuel Resistant No
Hardness 60 Shore A (±5)
Tensile Strength 1.5 MPa
Density 650 kg/m³
Compressive Strength >70 MPa


Quick Links to Related Categories and Solutions

Browse Our Range Of MR31 / TS1521 Industrial Grade Cork Gasket Sheets
Browse our Cork Gasket Sheets Range
View AllClose

Additional Information

Colour:
Brown
Thickness:
3mm
Width:
1040mm
Length:
1270mm
Sheet Size:
1040mm x 1270mm
Minimum Continuous Temperature:
-30°C
Maximum Continuous Temperature:
110°C
Shore Hardness:
60 Shore A
Density:
0.65 g/cm³
Food Grade / Potable Water Approvals?:
No
View AllClose