Red Fibre Vulcanised Gasket Sheet - 1.5mm Thick x 295mm x 495mm

SKU:
SWM000214P01V0002
Availability:
Cut to Order, Ships in 2-3 W/Days.

Bulk discount rates

All Bulk Prices Below Are Quoted Including GST.

Buy 3 - 4 and pay only $12.39 each
Buy 5 - 14 and pay only $11.54 each
Buy 15 - 24 and pay only $11.03 each
Buy 25 or above and pay only $10.65 each
  • Info Image for our Red Fibre Vulcanised Gasket Sheet - 1.5mm Thick x 295mm x 495mm; Versatile, economical grade of gasket fibre sheet.
  • 1.5mm Thick x 295mm Wide and 495mm Long Sheets of this tough, resilient and long-lasting gasket material. Red Fibre Sheet is very economical and is often used for making washers, gaskets and wear strips.
  • 1.5mm Thick x 295mm Wide and 495mm Long Sheets of this tough, resilient and long-lasting gasket material. Red Fibre Sheet is very economical and is often used for making washers, gaskets and wear strips.
$15.15
Inc. GST
$13.77
Ex. GST
Frequently bought together:

Description

  • Very economical type of gasket and sealing material.
  • Tough, long wearing with good tear resistance.
  • Ideal for making washers, wear strips, spacers and low voltage insulators.

Red Fibre Vulcanised Gasket Sheet is an economical type of general purpose sealing material. It’s been around forever (since at least the late 19th century to be more precise) and continues to be used today to punch out inexpensive washers, make wear strips and various other non-critical sealing applications.

Red Fibre Sheets are manufactured from cellulose paper with a cellulose binder. Characterised by its’ red colouring, this sealing material is very tough and hard wearing. It’s suitable for die cutting and punching and can also be cut using a guillotine, saw or drill.

Red Fibre Sheets exhibit very good resistance to tearing and are therefore often used for making washers for tapware and low-pressure sealing. The material is quite susceptible to swelling as it has a high moisture absorption rate. For this reason, if using Red Fibre for electrical insulation purposes, you should only do so in dry, low humidity environments.

Our Red Fibre has an operating temperature range between +10°C and +85°C and a density of approximately, 1.4 grams per cm³.

Red Fibre Sheet is available from Swift in several different thicknesses and sheet sizes. For anyone looking to make your own washers or seals, this inexpensive and hearty sealing material could be a great choice.

Typical Applications for Red Fibre Sheet

  • Making washers.
  • Creating tough wear strips.
  • Making low voltage electrical insulation parts.

Red Fibre Specifications.

Colour Red
Density 1.4 gm / cm³
Temperature Range +10°C to +85°C
Base Material Cellulose Paper
Binder Cellulose
Water Absorption Rate High
View AllClose

Additional Information

Colour:
Red
Thickness:
1.5mm
Width:
295mm
Length:
495mm
Sheet Size:
295mm x 495mm
Minimum Continuous Temperature:
-10°C
Maximum Continuous Temperature:
85°C
Density:
1.4 g/cm³
Food Grade / Potable Water Approvals?:
No
View AllClose