Multi Repair Stick - 57gm

• Mineral filled epoxy repair putty that can be mixed, shaped and applied by hand before setting hard.
• Simple to use: just cut, knead by hand and stick. No tools required.
• NSF Approved for use in Potable Water Applications.
• Excellent adhesion, non-rusting and long lasting. Perfect for patching parts, gap filling, sealing leaks and more general repair work.

Weicon Multi Repair stick is a quick and easy to use solution for making lasting repairs to surfaces, components and parts. It’s designed for filling holes, cracks and leaks in all kinds of components.

It adheres particularly well to aluminium, stainless steel, brass, copper, steel and other metals, most hard plastics, glass, ceramic, tile, stone, bricks and concrete. It also bonds to wood, timber like products and fibre refinroced materials (like fibreglass). It does not stick well to rubber elastomers.

Our Multi Repair Stick is dead-simple to use; just cut off the amount you want, mix by hand and apply. Once cured, this mineral filled epoxy repair putty is white in colour and will withstand temperatures between -25°C and +120°C. Aluminium Repair Stick will not rust and can be tapped, drilled and sanded after it’s hardened.

This simple yet versatile epoxy putty has a variety of benefits which have led to its use all over the world. Just some of them include:

No Tools Required.

Like all our Repair Putties, Multi Repair Stick does not require any tools (unless you count a pair of rubber gloves). Just cut off the amount you want, knead the two parts until they’re a single colour and apply.

That’s it. Multi Repair Stick will set hard.

Weicon Multi Steel Repair Sticks have been certified in accordance with NSF/ANSI 61 for use in applications that process drinking (potable) water.

Can Be Modified Once Set.

Fully cured Multi Repair Sticks have a hardness rating of 70 Shore D. To put that in perspective, most hard hats measure about 80 Shore D. The fact it sets this hard means you can machine this putty once it’s cured. More specifically, Multi Repair Stick can be…

• Sanded
• Tapped
• Drilled
• Filed

This lets you finish your repair job down to tight tolerances of give the putty an ultra-smooth finish. 

Can be painted over.

Since it’s an epoxy, Multi Repair Stick can be painted once it’s fully cured.

Fast Curing

Speaking of curing, Multi Repair Stick sets quite quickly. Assuming fairly normal working conditions (20°C and 50% relative humidity), you can expect cure times to be about…

• 35% Cured (Handling Strength) – 15 Minutes
• 50% Cured (Mechanical Strength) – 1 Hour
• 100% Cured (Full Strength) – 24 Hours.

These times are all based on about 25 grams of putty. If you mix more, cure times will be accelerated due to the nature of epoxy curing (exothermic reaction). Similarly, if you are working in warmer conditions, cure times will be accelerated.

Good Temperature & Chemical Resistance.

Once cured, Multi Repair Sticks have very good heat resistance and the ability to withstand attack from many different types of chemicals.

This epoxy putty handles continuous exposure to temperatures between -25°C and +120°C as well as short-term spikes up to 150°C (short-term being defined as less than 2 hours at a time).

On the chemical resistance front, Multi Repair Stick is resistant to many common fluids and media; including…

• Salt and Fresh Water
• Diesel Fuel Oil
• Heating Oil
• Petrol
• Chlorinated Water
• Greases, Oils and Waxes

Sticks to a variety of different materials.

This repair stick has been engineered to be as versatile as possible. Consequently it has excellent compatability with a wide range of materials and surfaces types. These include:

• Aluminium
• Stainless Steel
• Steel
• Brass
• Copper
• Other types of metal.
• Hard plastics like Nylon, ABS or Polycarbonate (it will not stick to low surface energy materials like PE or PTFE).
• Glass
• Ceramic
• Tiles
• Stone
• Concrete
• Bricks

In addition, it also sticks well to other materials like wood, timber dervied materials and fibre-reinfroced plastics. One thing it doesn’t bond well to is rubber so that should be avoided.

To get the best adhesion possible, we recommended giving the bonding surface a good clean before applying the putty. If you’re sticking to a really smooth surface, adhesion will be enhanced by roughening the bonding surface a bit first.

Electrical Insulation Properties.

For some applications, it’s important to only use compounds that have good dielectric strength. Since it’s based on filled epoxy, Multi-Purpose Repair Stick has good electrical properties. It has a dielectric strength rating of 3 kV/mm (tested in accordance with ASTM D149) and an electrical resistance rating of 5 · 1011 Ω/cm (ASTM D257).

Applications for Multi Repair Sticks

Multi Repair Stick is used in many different industries around the world. It is often used for repairs in the marine, automotive and transport sector but is also popular for engineering, facilities maintenance and repair work around the home and office. Some specific application examples include:

• Repairs, hole patching and reconditioning of fuel and water tanks
• Repairs to gearboxes
• Sealing, fixing and patching heating, ventilation and air conditioning equipment
• Repairs to car and boat bodies
• Covering gaps in plastic parts and.
• Metal machinery and tool repairs
• Fixing leaks on pipes and tanks
• Fixing window frames and doors
• Repair, crack filling, hole filling and the recondition of components
• Model building
• Repairs to metals, plastics, ceramic surfaces, glass, stone, bricks, wood and more.