| Buy 5 or above | and pay only $13.54 each |
3M 467MP Double Sided Adhesive Transfer Tape is a high quality grade of tape that can be used in a variety of applications. This tape is extremely thin, (just 0.06mm once the liner is removed) and is able to be used for indoor or outdoor applications as it has very good UV resistance. Manufactured by 3M using their 200MP acrylic adhesive, 3M 467MP Double Sided Adhesive Transfer Tape bonds well to metals, many rubbers, industrial foams and high surface energy (HSE) plastics.
Each roll of 3M 467MP Double Sided Adhesive Transfer Tape is supplied with a tan, printed, 0.107mm thick Kraft Paper Liner. This liner removes cleanly and is moisture stable.
3M 467MP has outstanding chemical resistance and withstands splashes of organic solvents, weak acids and bases, salt water, cleaning solutions, germicidal compounds, disinfectants, oils and more. It performs well when exposed to varying humidity.
This tape also has excellent temperature resistance. It can withstand temperatures between -40°C and 149°C (plus short-term spikes to 204°C). It also handles changes in temperature well and maintains its high bond strength through hot/cold cycles.
3M 467MP Double Sided Adhesive Transfer Tape has outstanding shear strength to resist slippage or edge lifting. When used to bond to plastics it will allow for some immediate repositioning of the parts. Once it is in place, bonds created with 3M 467MP will only grow in strength over time.
| Colour | Clear / Transparent |
| Adhesive Type | 200MP Firm Acrylic |
| Backing Material | Acrylic |
| Liner | Removable Polycoated Kraft Paper, 3M 467Mp Printed in Green |
| Adhesive Thickness | 0.06mm |
| Liner Thickness | 0.11mm |
| Continuous Temperature Rating | -40°C to +149°C |
| Maximum Short-Term Temperature | 204°C |
| Dielectric Strength | 880 volts/mil |
| UV Resistance | Excellent |
| Moisture Resistance | Excellent |
| Plasticiser Resistance | Low |
| Humidity Resistance | Excellent |
| Adhesion to Surfaces 90° Peel, 72 Hour Dwell Time, 2 mil Aluminium Foil Backing |
|
| Adhesion to Aluminium | 21 N / 25mm |
| Adhesion to Acrylic | 17 N / 25mm |
| Adhesion to Glass | 22 N / 25mm |
| Adhesion to Polycarbonate | 16 N / 25mm |
| SKU | SWM000031P01 |
|---|---|
| Brand | 3M |
To ensure maximum bond strength, it is important that the surface be thoroughly cleaned and dried before you apply the tape. The exact type of cleaner you use depends on a) the type of material you are working with and b) how polluted it is. No matter which way you go with the cleaner, make sure it is dried afterwards and before you place the tape.
If bonding to very smooth surfaces it can also be a good idea to scuff or roughen the surface a little. This increases the amount of surface area available for 467MP to bond to.
It’s not suggested no. Ideally, the temperature of the materials being bonded and the surrounding environment during tape application will fall between 15°C and 38°C. Anything below 15°C and issues may occur with adhesion.
We can arrange it, yes. These are made to order so if you’d like us to arrange a quote please do contact us and we’ll sort one out.
