Adhesive Heat Shrink Tape, Black - 1mm Thick x 50mm Wide x 5 Metres Long

SKU: SWM000545B01V0003
Availability: Available for Fast Dispatch.
$32.02
INC. GST
$29.11
EX. GST

BULK DISCOUNT RATES

All Bulk Prices Below Are Quoted Including GST.
Buy 3 - 4 and pay only $29.81 each
Buy 5 or above and pay only $29.22 each
  • Easy to use an apply.
  • Lined with a hot melt adhesive.
  • Ideal for busbar insulation and cable sheath repair.
  • Supplied without a liner for easy installation. Will not stick to itself before heat is applied.

Our Adhesive Heat Shrink Tapes are high quality electrical insulation materials often used for sealing cable terminations and joints, busbar insulation and for cable sheath repair work.

They are used with AC voltages up to 25kV and are available in green, red or black colours.The black is UV Stabillised.

These heavy-duty tapes are 1mm thick and are lined with a heat activated adhesive. The hot melt adhesive will only activate once heat is applied so the tape will not stick to itself prior.

Technical information on our Adhesive Lined Heat Shrink Tapes is available on the specifications tab.

Elongation at Break ≥350% ASTM D-412
Tensile Strength 12 MPa ASTM D-412
Dielectic Strength 25kV / mm ASTM D-149
Volume Resistivity 1x1014 Ω/cm ASTM D-257
Corrosion Resistance Pass ASTM D-2671
Water Absorption ≤0.25% ASTM D-570

 

Adhesive Heat Shrink Tape Recommended Clearances
System Voltage Clearance in Air Clearance with BT
Phase to Earth Phase to Phase
15kV 120mm 75mm 65mm
17.5kV 160mm 110mm 90mm
25kV 220mm 155mm 115mm
SKU SWM000545B01