BULK DISCOUNT RATES
Buy 3 - 5 | and pay only $22.68 each |
Buy 6 - 11 | and pay only $21.75 each |
Buy 12 or above | and pay only $20.01 each |
Buy 3 - 5 | and pay only $22.68 each |
Buy 6 - 11 | and pay only $21.75 each |
Buy 12 or above | and pay only $20.01 each |
Brass Spray is a metal coating spray used to coat all kinds of metal surfaces. This spray is manufactured by Weicon from a combination of acrylic resin (binding agent) and high purity (approximately 99.9%) brass pigments. The result is an easy to use spray that has the same appearance as brass which makes it perfect for decorative, design, DIY, hobby and many other kinds of work.
It is also used for creating a rich, long-lasting antique finish on all kinds of metal including copper, mild steel, galvanised iron and aluminium.
Weicon Brass Spray can be applied directly to most metal surfaces or, for greater adhesion and a solid rust protection undercoat, combined with Weicon Zinc Spray (which serves as the primer). It’ll be dust dry about 10 minutes after it is applied and hardened 4-6 hours later. Once fully hardened, Brass Spray can be painted if need be.
This high-quality metal colouring, coating and protection spray can be used for parts that will be stored either indoors or outdoors and is very long lasting. It resists cracking when surfaces flex with thermal changes and will handle temperatures between -50°C and +300°C once it is fully hardened.
Colour | Brass, Metallic Matt Finish |
---|---|
Areas of Use | Indoors and Outdoors |
Binding Agent | Acrylic Resin |
Pigment | Brass |
Pigment Purity | 99.9% (Approx.) |
Percentage of Metal in the Dry Film | 52% (Approx.) |
Specific Gravity | 0.9 - 1.1 g/cm³ |
Suggested Primer | Weicon Zinc Spray |
Processing Temperature | +5°C to +35°C (Ideal is 18°C - 25°C) |
Consumption w/ 1.5 Cross Coats | 120ml / m² (Approx.) |
Layer Thickness w/ 1.5 Cross Coats | 20-30μm |
Dust Dry | 10 Minutes (Approx.) |
Hardened | 4-6 Hours (Approx.) |
Paintable | 4-6 Hours (Approx.) |
Abrasion Resistant | Yes |
Cross-Cutting (DIN 53151 / ISO 2409) | Cross Cut Characteristic Value GT 0 to GT 1 |
Salt Spray Test (ISO 9227) | Not Tested |
Mandrel Bend Test (DIN EN ISO 1519) | No Hair Cracking |
Top Coating | Not Required |
Temperature Resistance (After Complete Hardening) |
-50°C to +300°C |
For more information on how to use our Brass Spray and achieve best results, we really do suggest consulting the Technical and Safety data sheets located on the media tab.
SKU | SWM000153B01V0001 |
---|---|
Model # | 11102400 |
Brand | Weicon |