Easy-Mix RK-7100 MMA Fast Curing Structural Acrylic Adhesive - 50gm

SKU: SWM000263B01V0001
MPN: 10566050
Availability: Available for Fast Dispatch.
$46.64
INC. GST
$42.40
EX. GST

BULK DISCOUNT RATES

All Bulk Prices Below Are Quoted Including GST.
Buy 3 - 5 and pay only $45.43 each
Buy 6 or above and pay only $43.10 each
  • Very high strength grade of acrylic adhesive with wide-ranging material compatibility.
  • Fast curing.
  • Impact resistant with excellent residual elasticity.
  • Easy-Mix system makes application easy. No measuring, no manual mixing. Apply directly to the surface.

Our Easy-Mix RK-7100 MMA Adhesive is a high strength, versatile and fast curing glue used for making permanent bonds and joins. This glue is quite thick which allows for accurate application and use on vertical surfaces. RK-7100 also has a fast cure time and achieves 35% of its’ final strength after around 25 minutes.

RK-7100 Acrylic Adhesive utilises the Weicon Easy-Mix dosing system which eliminates the need for complex mixing or measuring. Manufactured in Germany, this professional-quality adhesive is widely used for automotive, engineering, construction, marine, electrical and general repair work.

This glue is quite similar to our popular RK-7000 with the primary (though not sole) difference lying in cure time. RK-7100 is far quicker whilst the RK-7000 is slower and more suitable for jobs that require this feature.

Easy-Mix RK-7100 has a variety of features and benefits, some of which are expended on below:

Extremely Strong Bonding of a Variety of Materials.

RK-7100 MMA Adhesive is designed for permanent, high-strength bonding. This glue is highly compatible with the following material types:

  • Metals – Including steel, aluminium, stainless steel and many coated metals.
  • Wood
  • Ceramics
  • Polyurethane
  • Epoxies
  • Many Plastics – Including PVC, ABS, Fibreglass, Phenolic and PMMA

These (like most) adhesives can struggle with very low surface energy types of plastic like polyethylene (PE), polypropylene (PP) and PTFE (Teflon®). For bonding these materials with RK-7100, the use of a primer or other surface pre-treatment is likely required.

The attached RK-7100 Technical Data includes shear strength ratings for many of the above listed materials.

Application Versatility.

In many situations, bond strength is just one of the considerations that go into choosing an adhesive. Once it’s fully cured, RK-7100 offers a variety of other features which may be of benefit for your job:

  • Can be grinded and painted over once it’s fully cured.
  • Withstands temperatures between -55°C and +125°C.
  • Resistant to weathering, can be used indoors or outdoors.
  • Excellent chemical resistance (see the TDS for a Chemical Compatibility Table).

Accelerated Cure Time.

RK-7100 has a pot life of 5 minutes. After application you can expect cure times to be approximately:

  • 25 Minutes for Handling Strength (35% Cure).
  • 60 Minutes for Mechanical Strength (50% Cure).
  • 12 Hours for Full Cure (100%).

If you’re looking for an acrylic glue with a slower cure time, we suggest our RK-7000.

High Viscosity.

RK-7100 MMA is highly viscous. This thick glue can be applied with a good amount of accuracy to complex bond lines and even to vertical surfaces. This also helps reduce dripping and spillage.

Easy to Use thanks to the Easy-Mix System.

The Weicon Easy-Mix Dosing System eradicates complex mixing and measuring and makes getting the right amount of glue, where you need it, simple.

Simply slot the container of RK-7100 into a compatible dispensing pistol (we suggest the Weicon D 50) and attach the Quadro Mixing Nozzle (one is included with each container). That’s it. When you pull the trigger the two parts that make up RK-7100 Acrylic Adhesive will be mixed as they travel along the nozzle so that, by the time they reach the surface, you have a single homogenous adhesive.

Spare mixing nozzles are also available, and the gun works with a variety of our adhesives, so you can mix and match depending on your particular requirements. 

Typical Applications for RK-7100 Structural Acrylic Adhesive.

RK-7100 MMA Structural Adhesive is used around the world in a variety of construction, repair and manufacturing environments. Just some of its many uses include:

  • The manufacture of plastic parts and components.
  • Metal construction and fabrication.
  • Residential and commercial construction.
  • Boat construction and repairs.
  • Car body and vehicle construction and repairs.
  • Electrical engineering.
  • Machine building and maintenance.
  • For mode and mould making.
  • For permanently laminating / joining dissimilar materials such as plastic to metal bonding.
Basis Methyl Methacrylate (MMA)
Colour After Curing Cream, Milky white
Density of the Mixture 0.98 – 1.02 g/cm³
Mixing Ratio 1:1
Viscosity of the Mixture 40,000 – 60,000 mPa·s
Application Procedure Easy-Mix
Composition Viscous
Pot Life (at 20°C) 5 Minutes
Handing Strength (35% of Final) 25 Minutes
Capable of Bearing Mechanical Loads
(50% of Final)
60 Minutes
Processing Temperature +10°C to +40°C
Curing Temperature +18°C
Fully Cured (100%) 12 Hours
Adhesive Gap Bridging 0.1mm – 5mm
Temperature Resistance (After Curing) -50°C to +125°C
Shear Strength (According to DIN EN 1465)
Aluminium 20 N/mm²
Sand Blasted Steel 23 N/mm²
Stainless Steel 22 N/mm²
Polycarbonate 12 N/mm²
PMMA 9 N/mm²
ABS 7 N/mm²
Hard PVC 12 N/mm²
Fibreglass Reinforced Polyester 21 N/mm²
Fibreglass Reinforced Epoxy 22 N/mm²
Polyamide 6.6 1 N/mm²

 

SKU SWM000263B01V0001
Model # 10566050
Brand Weicon

Others Also Bought