Heat Shrink Tube, Yellow 1.5mm Dia x 1200mm Long (Single Wall, 2:1 Shrink)

• Economical 1.2 Metre lengths allow you to buy just what you need for the job
• Will shrink down to half their original diameter when exposed to heat (2:1 shrink ratio)
• Tough and strong yet very flexible and easy to handle
• Flame retardant and self-extinguishing. UV stabilised and rated to 600 volts.

Thin Wall Heat Shrink Tube in 1.2 Metre Lengths are ideal for those who don’t go through a lot of heat shrink and want to keep the amount they must buy to a minimum. Apart from the fact that these are pre-cut, 1200mm long lengths, these are exactly the same as our Thin Wall Heat Shrink Tubing Handy Packs. 

Like those, our Thin Wall Heat Shrink Tube has a 2:1 shrink ratio which means 20mm diameter sleeving will shrink down to just 10mm when heated. It does not have any adhesive lining and is incredibly flexible and easy to handle.

It should also be mentioned that even though these are the thin wall grade, they’re still incredibly tough and ideal for protecting cable joins from abrasion. They’ll shrink when exposed to temperatures of just 90°C and, once shrunk tolerate temperatures of up to 125°C and are UV stabilised, flame retardant and self-extinguishing (except for clear).

Please note this style of heat shrink tubing is not adhesive lined. The sizes listed on this page are their pre-shrunk size (i.e. 10mm listed here will shrink to 5mm).

This is just one style and colour in our large range of heat shrink tubing and insulation parts. 

Applications for Heat Shrink Tube

• Protecting and insulating cable joins
• Serving as an outer protective layer for softer primary insulation
• Wire harnessing
• Bundling cables and wires
• Lead, component, wire and cable identification (colour coding)
• Bus bar and switchgear insulation

Heat Shrink Tube to Lay Flat Internal Dimensions Table.