Flex+Bond Liquid Coating and Casting Adhesive Sealant - White - 85ml

SKU: SWM000235B01V0001
MPN: 13354085
Availability: Available for Fast Dispatch.
$18.10
INC. GST
$16.45
EX. GST

BULK DISCOUNT RATES

All Bulk Prices Below Are Quoted Including GST.
Buy 6 - 11 and pay only $17.26 each
Buy 12 or above and pay only $16.73 each
  • Self-levelling adhesive sealant for casting and coating.
  • Used for creating casting layers up to 10mm deep.
  • MS Polymer based adhesive that works with most surfaces and materials.

Flex+Bond Liquid is a versatile adhesive sealant that is ideal for coating, casting and encapsulating work. Engineered by Weicon in Germany, this adhesive is based on MS Polymers and is completely free of silicones, solvents and isocyanates. It sticks to most materials and surfaces.

As a self-levelling liquid, Flex+Bond Liquid is very easy to work with. It can be used to create castings up to 10mm deep and cures to form a solid mass that has good flexibility. Once fully cured, it will handle movements in bonded joints of up to 10% and has a maximum elongation of 400%.

Flex+Bond Liquid is white in colour. Once cured, it can be painted over with liquid paint.

Skin-Over time for Flex+Bond Liquid is about 40 minutes while full curing will occur at a rate of about 2-3mm in the first 24 hours. This liquid adhesive sealant will withstand temperatures between -40°C and +80°C once cured (as well as short term spike to +120°C).

Applications for Flex+Bond Liquid.

Flex+Bond Liquid Adhesive Sealant is most commonly employed for casting, coating or encapsulating work. It is used in a number of industries including…

  • Electrical and electronic device manufacture and repair.
  • Metal engineering and tank construction.
  • Casting of cable connection.
  • Valve construction and repair.
  • Heating, Ventilation and Air Conditioning (HVAC) Technology.
Basis One Part MS Polymer
Colour White
Viscosity 7,000
Density 1.46 g/cm³
Cure Type Interaction with Humidity
Processing Temperature +5°C to +40°C
Curing Conditions +5°C to +40°C
30% - 95% RH
Skin-Over Time 40 Minutes
Cure Speed (First 24 Hours) 2-3mm
Volume Change (DIN 52451) -9%
Gap Fill Max. Depth 10mm
Gap Fill Max. Width 25mm
Shore Hardness
(DIN 5355 / ASTM D 224)
43 Shore A (±5)
Elongation At Break
(DIN 53504 / ASTM D 2240)
400% (±5)
Tensile Strength of Sealant 2.2 N/mm²
Average Tensile Shear Strength
(DIN 53283 / ASTM D 12)
1.8 N/mm²
Tear Strength
(DIn 53515 / ASTM D 1002)
11 N/mm²
Max. Movement Capacity 10%
Temperature Resistance
(Continuous)
-40°C to +80°C
Temperature Resistance
(Short-Term)
+120°C
Paintable (Liquid Paint) After Complete Curing
Building Material Category Code B 2
Shelf Life
Stored at 5°C to +25°C
12 Months (Unopened)

 

 

SKU SWM000235B01V0001
Model # 13354085
Brand Weicon

What should I do to prepare the surface?

Before applying Flex+Bond Liquid, the surfaces must be clean and free of grease.

Many surface contaminants (such as oil, dust and dirt) can be cleaned with our Weicon Surface Cleaner. For heavily soiled metal surfaces we suggest our Weicon Cleaner Spray S. If you need to remove old paint or adhesive residues, our Sealant and Adhesive Remover is likely more suitable.

Mechanical roughening (e.g. sanding or sand-blasting) can considerably improve adhesion when bonding smooth surfaces.

Do I need any special tools to apply Flex+Bond?

No. Flex+Bond Liquid can be squeezed directly from the tube by hand.