Gaskets & Sealing

Small sheets of this high performance grade of gasket sheet with excellent resistance to oils, fuels, water, steam and much more. C4430 has excellent stress retention and good temperature tolerance.

Medium sheets of this high performance grade of gasket sheet with excellent resistance to oils, fuels, water, steam and much more. C4430 has excellent stress retention and good temperature tolerance.

Half-sized sheets of this high performance grade of gasket sheet with excellent resistance to oils, fuels, water, steam and much more. C4430 has excellent stress retention and good temperature tolerance.

Full Sheets of this high performance grade of gasket sheet with excellent resistance to oils, fuels, water, steam and much more. C4430 has excellent stress retention and good temperature tolerance.

C4430 Ring Type general-purpose fibre gaskets for ANSI Flanges. Available in 1.5mm & 3mm thick as standard to suit ANSI 150, 300, 600, 900 or 1500 pound flanges.

Small sheets of this conformable gasket material for lower pressure & temperatures. C6327 has a high rubber content and swells when used with oils and fuels. It is ideal for sealing many low surface load applications and is potable water approved.

Medium sheets of this conformable gasket material for lower pressure & temperatures. C6327 has a high rubber content and swells when used with oils and fuels. It is ideal for sealing many low surface load applications and is potable water approved.

Half-Sized sheets of this conformable gasket material for lower pressure & temperatures. C6327 has a high rubber content and swells when used with oils and fuels. It is ideal for sealing many low surface load applications and is potable water approved.

Full sheets of this conformable gasket material for lower pressure & temperatures. C6327 has a high rubber content and swells when used with oils and fuels. It is ideal for sealing many low surface load applications and is potable water approved.

A special type of rubber with outstanding resistance to abrasion, wearing and tearing. Chutex Red Lining Rubber is used for rubber skirts, wear protection and heavy-duty lining applications. Available by the metre.

Made to suit BS3063 Table D and/or Table E Flanges in sizes ranging from 15NB through to 600NB these compressed fibre gaskets are made from our 1.5mm Conafi General Purpose Gasket Sheet for medium temperatures and sealing pressures.

Made to suit BS3063 Table D and/or Table E Flanges in sizes ranging from 15NB through to 600NB these compressed fibre gaskets are made from our 3mm Conafi General Purpose Gasket Sheet for medium temperatures and sealing pressures.

Cut to fit ANSI 150# Flanges in sizes ranging from 15NB through to 600NB these compressed fibre gaskets are made from our 1.5mm Conafi General Purpose Gasket Sheet for medium temperatures and sealing pressures.

Cut to fit ANSI 150# Flanges in sizes ranging from 15NB through to 600NB these compressed fibre gaskets are made from our 3mm Conafi General Purpose Gasket Sheet for medium temperatures and sealing pressures.

Cut to fit ANSI 300# / 600# Flanges in sizes ranging from 15NB through to 600NB these compressed fibre gaskets are made from our 1.5mm Conafi General Purpose Gasket Sheet for medium temperatures and sealing pressures.

Cut to fit ANSI 300# / 600# Flanges in sizes ranging from 15NB through to 600NB these compressed fibre gaskets are made from our 3mm Conafi General Purpose Gasket Sheet for medium temperatures and sealing pressures.

Cut to fit ANSI 900# / 1500# Flanges in sizes ranging from 15NB through to 600NB these compressed fibre gaskets are made from our 1.5mm Conafi General Purpose Gasket Sheet for medium temperatures and sealing pressures.

Cut to fit ANSI 900# / 1500# Flanges in sizes ranging from 15NB through to 600NB these compressed fibre gaskets are made from our 3mm Conafi General Purpose Gasket Sheet for medium temperatures and sealing pressures.

General purpose fibre ring face gaskets to suit BS3063 Table D and/or Table E Flanges in sizes ranging from 15NB through to 600NB. Made from 1.5mm thick Conafi.

General purpose fibre ring face gaskets to suit BS3063 Table D and/or Table E Flanges in sizes ranging from 15NB through to 600NB. Made from 3mm thick Conafi.

500mm Square Sheets of Conafi in a selection of thicknesses. Conafi has been developed for industrial sealing applications and withstands a range of chemicals and media (including oils, fuels, water and weak acids) and will handle up to 220°C.

1550mm Square Sheets of Conafi in a selection of thicknesses. Conafi has been developed for industrial sealing applications and withstands a range of chemicals and media (including oils, fuels, water and weak acids) and will handle up to 220°C.

Ideal for use with hollow punch tools. Our Allpax Dead Blow Hammers have a steel core, soft plastic exterior and textured handle for superior comfort. They have no exposed metal, are durable and long lasting.

Made in the USA, easy to use and very long lasting. Our Dovetail Punch Kit is used for making interlocking joins on larger flange gaskets, cork, sponge and rubber sealing strips.

A premium grade rubber designed specifically for making gaskets, seals and linings for drinking water applications. Our EPDM Rubber Sheet for Potable Water is available by the metre.

Manufactured from our quality black, 65 Duro EPDM Rubber for potable water applications, these gaskets are available to suit AS2129 Table D and/or Table E Flanges in sizes ranging from 15NB through to 600NB.

Manufactured from our quality black, 65 Duro EPDM Rubber for potable water applications, these gaskets are available to suit BS3063 Table D and/or Table E Flanges in sizes ranging from 15NB through to 600NB.

Cut to fit ANSI 150# Flanges in sizes ranging from 15NB through to 600NB these rubber gaskets are approved for use in systems handling potable / drinking water.

Cut to fit ANSI 300# and/or 600# Flanges in sizes ranging from 15NB through to 600NB these rubber gaskets are approved for use in systems handling potable / drinking water.

Cut to fit ANSI 900# and/or 1500# Flanges in sizes ranging from 15NB through to 600NB these rubber gaskets are approved for use in systems handling potable / drinking water.