| Buy 3 - 4 | and pay only $45.55 each |
Vidaflex 942 Acrylic Fibreglass Electrical Sleeving is flexible insulating sleeving made from braided fibreglass that is coated in a solid layer of acrylic resin. The resulting sleeving has a tough outer shell that resists abrasion and is available in a range of different colours to make lead and cable identification easy.
Vidaflex 942 is available in a large range of bore sizes and withstands continuous exposure to temperatures up to 155°C (Class F using the old thermal electrical classification system). It has good dielectric strength and can be used on a range of low, medium and high voltage equipment.
This page lists our range of pre-cut short, red coloured rolls of 942 Sleeve. To buy, simply select the sleeving diameter required.
Our online store also has this material in a number of full rolls sizes as well as black and yellow colours. Links to the various pages for each is included below..
| Continuous Operating Temperature | 155°C |
|---|---|
| Short-Term Operating Temperature | 200°C |
| Inside Material | Braided Fibreglass |
| Outside Material | Acrylic Resin |
| Nominal Wall Thickness for 1-3mm Ø Sizes | 0.45mm (Minimum) |
| Nominal Wall Thickness for 4-6mm Ø Sizes | 0.7mm (Minimum) |
For more technical information please see the Technical Data Sheet for our Vidaflex 942 Electrical Insulation Sleeving located on the media tab.
| SKU | SWM000045P02 |
|---|---|
| Brand | Krempel |
Technical Data Sheet.
 |
||||
| Vidaflex 942 Acrylic Fibreglass Electrical Sleeving TDS |
Related Content & Resources.
 |
||||
| Vidaflex 942 Acrylic Coated Sleeving Quick Reference Guide | ||||
There are, though they’re not standard. In the last few years the manufacturer of this sleeving has cut-down on their sizes and colours leaving us with access to a far more limited colour selection. If there’s a particular colour you require please do let us know what you’re after as well as the size and quantity and we’ll see if we can track it down for you.
Only a very little bit. Because of the solid acrylic resin on the outside, Vidaflex 942 doesn’t have an awful lot of give. You will be able to achieve a little depending on the force exerted but we don’t suggest banking on any more than about 5%.
The fibreglass inner lining can a little but generally the outer resin liner stops this from happening too much. We do suggest cutting with scissors or a very sharp knife. Blunter tools can pull at the fibreglass.
