Weicon
GMK 2410 Rubber Metal Contact Adhesive - 5kg Can
- SKU:
- SWM000125B01V0005
- MPN:
- 16100905
- Availability:
- Available for Fast Dispatch.
Bulk discount rates
All Bulk Prices Below Are Quoted Including GST.
Buy 2 - 4 | and pay only $270.93 each |
Buy 5 or above | and pay only $255.96 each |
Description
- High strength adhesive designed for bonding rubber to rubber and rubber to metal
- Excellent choice for bonding larger surface areas that require a high strength bond with some flexibility retained.
- Also able to bond cellular rubber, leather, felt, insulation, textiles, wood and many plastics.
GMK 2410 Rubber Metal Contact Adhesive is a industrial-grade adhesive designed specifically for bonding rubber to metal and rubber to rubber. This high strength adhesive is used to create permanent, strong bonds and is usually used for larger surface areas.
In addition to its excellent compatibility with rubber and metal, GMK 2410 also works very well with cellular rubber (like our Neoprene Sponge Sheet), felt, insulation material, textiles, wood and many different types of plastic.
GMK 2410 is not recommended for bonding artificial PVC leather, PVC foam, polyethylene or polypropylene.
It is a polychloroprene (CR) based rubber adhesive that is yellow-ish in colour. Bonds created with GMK 2410 are not affected by humidity and exhibit excellent, permanent elasticity. Once fully cured, this adhesive will withstand temperatures between -40°C and +80°C as well as short-term spikes up to 100°C.
Contact adhesion time (which begins once the surfaces are pressed together) is approximately 10 minutes with some variation due to temperature and humidity to be expected. Full cure will be achieved after about 24 hours. GMK 2410 is manufactured in Germany by Weicon.
This versatile industrial contact adhesive is available in a large range of sizes and forms to suit the needs of all the different applications in which it is used.
Applications for GMK 2410 Rubber Metal Contact Adhesive
- Bonding rubber pads and sheet to metal wall structures, posts and piping.
- Sticking rubberised sponge and foam to metal supports.
- Laminating different thicknesses of rubber sheet and sponge.
- Gluing down rubber sheet to metal trays and plates.
- Laminating felt to form new thicknesses or bonding felt to metal.
- Gluing rubber to wood.
GMK 2410 Contact Adhesive Downloads & Resources
Dowloands & Resources
GMK 2410 Rubber Metal Contact Adhesive Specifications.
Colour | Yellow(ish) - Brown |
Basis | Polychloroprene (CR) |
Viscosity | 2,400 MPa (Approx.) |
Evaporation Time | 5-10 Minutes |
Contact Adhesion Time | 10 Minutes |
Final Strength | 24 Hours (Approx.) |
Continuous Temperature Resistance | -40°C to +80°C |
Short-Term Temperature Resistance | 100°C |
Processing Temperature | +15°C to +35°C |
Storage Stability | 12 Months (Minimum, Unopened) |
Consumption | 250 - 350 g/m² (Approx.) |
Median Tensile Shear Strength |
|
Galvanised Steel to EPDM Rubber | 0.16 N/mm² |
Galvanised Steel to Galvanised Steel | 1.6 N/mm² |
Galvanised Steel to SBR Rubber | 0.54 N/mm² |
Galvanised Steel to NBR Rubber | 0.54 N/mm² |
Videos
View AllCloseAdditional Information
Colour: |
Yellow |
Container Size: |
5kg |
One Part / Two Part: |
One Part |
Viscosity: |
2,400 MPas |
Minimum Continuous Temperature: |
-40°C |
Maximum Continuous Temperature: |
80°C |
Short-Term Temperature Resistance: |
+100°C |
Full Cure Time: |
24 Hours |
Contact Adhesion Time: |
10 Minutes |
Steel to NBR Rubber Tensile Shear Strength: |
0.57 N/mm² |
Steel to EPDM Rubber Tensile Shear Strength: |
0.16 N/mm² |
Food Grade / Potable Water Approvals?: |
No |