Titanium Repair Stick - 115gm

SKU:
SWM000036B01V0002
MPN:
10535115
Availability:
Available for Fast Dispatch.

Bulk discount rates

All Bulk Prices Below Are Quoted Including GST.

Buy 3 - 5 and pay only $33.76 each
Buy 6 - 11 and pay only $32.95 each
Buy 12 or above and pay only $32.56 each
  • Info Image for our Titanium Repair Stick; Heat resistant, hard, wear resistant epoxy repair putty.
  • 115gm packs of this industrial repair putty that withstands extremely high temperatures (up to 280°C continuous) and is tough, resilient and hard wearing. This grade bonds very well to metal surfaces and is ideal for repairs to high temperature parts.
  • Resurfacing a press-machine face using Titanium Repair Stick.
  • Filling and tapping a hole in metal profile with Titanium Repair Stick.
  • Repair Metal Ducting with Titanium Repair Stick
  • The full Titanium Repair Stick range of sizes.
$34.28
Inc. GST
$31.16
Ex. GST
Frequently bought together:

Description

  • Extreme temperature resistance: 280°C continuous
  • High strength and excellent wear resistance
  • Exhibits high adhesion to a wide variety of metal surfaces

Weicon Titanium Repair Stick is a very high quality, specialised type of epoxy putty with exceptionally high temperature resistance. This type withstands ongoing exposure to temperatures as high as 280°C and will even tolerate short-term spikes (of no more than 2 hours) up to 300°C. This, combined with its excellent physical toughness, wear resistance and adhesion, makes it ideal for use in repairing, sealing, patching and filling holes in demanding areas.

Weicon Titanium Repair Stick is manufactured in Germany from a special kind of epoxy resin combined with titanium fillers. It is grey green in colour after curing and has a very long pot life (0f about 70 minutes) to allow for very precise placement and shaping. Once curing does commence, handling strength will be achieved in about 2 hours while mechanical strength (50% of final) takes about 8 hours.

Titanium Repair Stick is designed specifically for long lasting, permanent repairs to metal sheets, parts and components. To allow this, it bonds very well to these types of surfaces.

Applications for Titanium Repair Sticks

  • Repairs to holes and leaks in tanks and conduit pipes
  • Repairs, filling and gap covering on aluminium, light metal and diecast parts
  • Shaft, bearing, pump and pump casing repairs and reconditioning
  • Reconditioning defective or damaged threads
  • Injection moulded part repair.

Titanium Repair Stick Downloads & Resources

Titanium Repair Stick Specifications.

Titanium Repair Stick Adhesion Compatibility with Various Material Types

Metal (e.g. stainless steel, brass, cast iron, aluminium) Highly Compatible
Hard Plastics* (e.g. epoxy laminates, rigid PVC) Compatible
Wood (e.g. oak, beech, spruce, balsa) Compatible
Derived Timber Products (e.g. plywood, MDF) Compatible
Fibre Reinforced Materials (e.g. GFRP, CFRP, Fibreglass) Compatible
Glass, Ceramics Compatible
Stone (e.g. granite, brick, concrete, marble) Compatible
Rubber Elastomers Not Compatible

*Performance will vary depending on the exact type of plastic being bonded. Generally, low surface energy plastics will be much harder to bond to then high surface energy (such as rigid PVC).

Colour Grey-Green (Once Cured)
Continuous Operating Temperature -50°C to 280°C
Short-Term Operating Temperature 300°C (2 Hours Maximum)
Maximum Gap Filling 15mm
Basis Epoxy Resin with Titanium Fillers
Food Grade No
Potable Water No
Density 1.9 g/cm³
Pot Life (for 25gm at 20°C) 70 Minutes
Handling Strength (35% of Final) 2 Hours
Mechanical Strength (50% of Final) 8 Hours
Final Strength (100%) 72 Hours if curing at 20°C / 24 Hours if curing at 65°C
Shore Hardness 80 Shore D
Dielectric Strength 3 kV/mm
ISSA Reference Number 75.530.06 (56gm) / 75.530.07 (115gm)
IMPA Reference Number 81 29 77 (56gm) / 81 29 78 (115gm)

 


Quick Links to Related Categories and Solutions

Browse our Titanium Repair Sticks Range
Browse Our Repair Sticks Range
Browse Our Whole Range of Cleaners
Browse Our Whole Range of Epoxy Adhesives & Coatings
View AllClose

Additional Information

Colour:
Grey
Container Size:
115gm
One Part / Two Part:
Two Part
Minimum Continuous Temperature:
-50°C
Maximum Continuous Temperature:
280°C
Short-Term Temperature Resistance:
300°C (2 Hours Maximum)
Density:
1.9 g/cm³
Handling Strength (35% of Final):
2 Hours
Full Cure Time:
72 Hours if curing at 20°C / 24 Hours if curing at 65°C
Shore Hardness:
80 Shore D
General Adhesion to Metals:
Highly Compatible
General Adhesion to Plastics (except LSE Types):
Compatible
General Adhesion to Wood:
Compatible
General Adhesion to Glass, Ceramics:
Compatible
General Adhesion to Stone:
Compatible
General Adhesion to Rubbers:
Not Compatible
Max. Gap Covering Power:
15mm
Food Grade / Potable Water Approvals?:
No
View AllClose