BULK DISCOUNT RATES
All Bulk Prices Below Are Quoted Including GST.
| Buy 6 - 11 | and pay only $31.97 each |
| Buy 12 or above | and pay only $31.56 each |
Description
- High bond strength and permanently elastic
- Universal adhesive with exceptional versatility
- Silicone free and suitable for indoor and outdoor use
Weicon Flex 310 M Classic Universal Sealant is a high quality, German engineered and manufactured, grade of elastic adhesive that remains permanently elastic after curing. It creates strong bonds and has outstanding resistance to ageing and UV. This MS polymer based adhesive is also completely free of silicones, solvents, halogens and isocyanate.
Flex 310 M Classic Universal Adhesive is ISEGA certified for use as an adhesive in food technologies and is both fresh water and salt water resistant. This high quality, 1-part sealant bonds well to a wide range of materials including stone, glass, wood, ceramic, metals and many plastics.
Applications for Flex 310 M Classic Universal Sealant
- Tank sealing, construction and repairs
- Electrical repairs
- Sealing around light fittings
- Shop fitting and displays
- Plastic processing
- Automotive, aerospace and marine interior work
- Boat and yacht construction
- Heating, air conditioning and ventilation work
- Metal construction
- Anywhere silicone adhesives are not suitable or permitted
Specifications
| Property | Typical Value | Standard |
|---|---|---|
| Colours | Black, Grey or White | - |
| Basis | 1 Component Polyoxypropylener | - |
| Viscosity | Pasty | - |
| Stability / Run-off | 1mm | ASTM D 222 |
| Density | 1.44 g/cm³ | - |
| Curing Conditions | +5°C to 40°C w/ 30%-95% Relative Humidity. | - |
| Skin-Over Time | 25 MInutes | 50% Relative Humidity, 23°C. |
| Cure Speed (First 24 Hours) | 2-3mm | - |
| Volume Change | -1% | DIN 52451 |
| Cure Type | Humidity | - |
| Max. Gap Filling Depth | 5mm | - |
| Max. Gap Filling Width | 25mm | - |
| Shore Hardness | 42 Shore A (+/- 5) | DIN 535 / ASTM D 224 |
| Elongation at Break | 650% (+/- 5) | DIN 53504 / ASTM D 2240 |
| Tensile Strength of the Pure Adhesive Sealant | 3.3 N/mm² | - |
| Average Tensile Shear Strength | 2.1 N/mm² | DIN 53283 / ASTM D 12 |
| Tear Strength | 20 N/mm² | DIN 53515 / ASTM D 1002 |
| Max. Movement Capacity | 15% | - |
| Overpaintable w/ Liquid Paint | No. | - |
| Building Material Category Code | B 2 | DIN 412 |
| Temperature Resisance | -40°C to +90°C Continuous Up to 130°C for Short Periods. |
- |
| Minimum Shelf Life | 12 Months when stored at 5°C to 25°C | - |
| SKU | SWM000040B01 |
|---|---|
| Brand | Weicon |
FAQs
Do I need any special equipment to use this?
No. Weicon Flex 310 M Classic Universal Adhesive Sealant can be applied using standard caulking guns.
How long does it take to cure?
Elastic adhesives cure by reacting with the humidity in the surrounding environment so cure time is impacted by both the room temperature and humidity. Assuming 50% relative humidity and a temperature of about 23°C, you can expect curing to occur at a rate of 2-3mm per 24 hours. This is measured from the sealants surface working in.
In higher temperatures and/or humidity, curing will be accelerated. Skin over time is 10 minutes (approximately).
How long have I got to work with it?
Skin over time is 25 minutes. This is based on an assumed working environment of approximately 23°C and 50% relative humidity. Higher temperatures and/or humidity will shorten this time a little while the inverse is also true.
