Container Size
BULK DISCOUNT RATES
All Bulk Prices Below Are Quoted Including GST.
| Buy 2 or above | and pay only $152.65 each |
Description
- Extremely wear resistant epoxy coating for metals and other high abrasion surfaces.
- Liquid, brushable and self-levelling.
- High heat resistance (180°C) and very good chemical resistance.
Manufactured by Weicon in Germany, our Plastic Metal Ceramic BL is a specialised epoxy coating that is used to line, coat and protect stressed surfaces. Ceramic BL is blue in colour and has a liquid consistency that allows it to be brushed onto surfaces (or sprayed).
Ceramic BL epoxy coating has excellent wear resistance and effectively protects coated surfaces from abrasion across a long service life.
Ceramic BL is made from a specialised type of epoxy resin that is filled with silicon carbide and zirconium silicate. It is a two-part epoxy that must be mixed before use. Once it’s mixed, you have a working pot life of about 40 minutes (assuming 20°C and 200gm mixed).
You can create coatings up to 10mm thick in a single pour with Ceramic BL. After 16 hours the epoxy will be capable of bearing mechanical loads while full cure will take about 24 hours.
Applications for Plastic Metal Ceramic BL
Weicon Ceramic BL Plastic Metal is widely used in numerous industries around the world to protect stressed metal and other surfaces from abrasion. Specific application examples include:
- The lining of heavily stressed pump housings.
- Wear protection for slide bearings.
- Abrasion protection on slides and funnels.
- The lining and pipes and flanges.
- Repair of castings, valves and blower fans.
- For the repair of metal components and the lining of stressed parts in the marine industry (IMPA and ISSA Registered).
- For lining trays and bins in the mining sector.
- In apparatus engineering and construction.
Specifications
| Basis | Mineral Filled Epoxy Resin |
|---|---|
| Mix Ratio | 100 : 15 (Resin / Hardener) |
| Density of the Mixture | 1.8 g/cm³ |
| Viscosity of the Mixture | 6,000 MPa |
| Colour | Blue |
| Maximum Layer Thickness | 10mm |
| Mechanical Strength (50% of Final) | 16 Hours (when curing at 20°C) |
| Final Strength | 24 Hours (when curing at 20°C) |
| Pressure | 85 MPa (at 25°C, DIN 53281-83) |
| Bending Strength | 95 MPa (at 25°C, DIN 53281-83) |
| Mean e-Modul | 7,000 - 8,000 MPa (at 25°C, DIN 53281-83) |
| Shore Hardness | 83 Shore D ( (at 25°C, DIN 53281-83) |
| Shrinkage During Cure | 0.02% |
| Thermoforming Resistance | +80°C |
| Continuous Temperature Rating | -35°C to +180°C |
| Thermal Conductivity | 0.7 W/m·K (ISO 8894-2) |
| Dielectric Strength | 15 kV/mm |
| IMPA Reference Number | 75.509.19 (500gm) / 75.509.20 (2kg) |
| ISSA Reference Number | 81 29 37 (500gm) / 81 29 38 (2kg) |
| SKU | SWM000245B01 |
|---|---|
| Brand | Weicon |
