Container Size
BULK DISCOUNT RATES
All Bulk Prices Below Are Quoted Including GST.
| Buy 2 or above | and pay only $107.69 each |
Description
- Mineral filled epoxy putty for repairing wet or submerged surfaces.
- Ideal for underwater repairs and fixes in areas that can’t be dried.
- Paste like consistency once mixed before curing into a hard, strong mass.
- High adhesive strength, non-conductive and withstands up to 120°C.
Our Plastic Metal UW is a specialised type of epoxy repair putty. This grade has been designed especially for wet or underwater applications and can be applied to most surface types.
Mixed Plastic Metal UW has a pasty consistency and can be applied by hand or spatula. This is also a fast curing grade. It allows for repeated layers after about an hour and a half and will be 80% cured after 4 hours. Pot life is about 20 minutes and full cure takes 16 hours.
Max layer thickness per application is 12mm.
Plastic Metal UW is white in colour and sets to form a strong, solid putty. Shore Hardness is 75 Shore D.
Manufactured in Germany, Plastic Metal UW Epoxy is widely used in the marine sector, in sewage plants, by utility providers and wherever repairs need to be made where moisture or the presence of water rule out other alternatives.
For more information on this quality epoxy repair compound, please consult the TDS on the resources tab. Alternatively, do not hesitate to contact us for more information. We’ll help wherever we can.
Specifications
| Basis | Mineral and Glass Filled Epoxy Resin |
|---|---|
| Mix Ratio (by Weight) | 100 : 100 (Resin / Hardener) |
| Density of the Mixture | 1.4 g/cm³ |
| Viscosity of the Mixture | 670,000 mPa·s |
| Colour | White |
| Maximum Layer Thickness | 12mm |
| Mechanical Strength (80% of Final) | 4 Hours (when curing at 20°C) |
| Final Strength | 16 Hours (when curing at 20°C) |
| Mean Compressive Strength | 57 MPa (DIN EN ISO 604) |
| Mean Tensile Strength | 28 MPa (DIN EN ISO 527-2) |
| Bending Strength | 38 MPa (DIN EN ISO 178) |
| e-Modulus (Tensile) | 2,200 - 2,500 MPa (DIN EN ISO 527-2) |
| Shore Hardness | 75 Shore D (DIN ISO 7619) |
| Continuous Temperature Rating | -35°C to +120°C |
| Thermal Conductivity | 0.3 W/m·K (DIN EN ISO 22007-4) |
| IMPA Reference Numbers | 812935 (500gm) / 812936 (2kg) |
| ISSA Reference Numbers | 75.509.24 (500gm) / 75.509.25 (2kg) |
| SKU | SWM000537B01 |
|---|---|
| Brand | Weicon |
