Plastic Metal Ceramic BL Wear Resistant Epoxy - 500gm Kit

SKU:
SWM000245B01V0002
MPN:
10400005
Availability:
Available for Fast Dispatch.

Bulk discount rates

All Bulk Prices Below Are Quoted Including GST.

Buy 2 - 3 and pay only $140.86 each
Buy 4 or above and pay only $133.04 each
  • Info Image for our Plastic Metal Ceramic BL Wear Resistant Epoxy; Liquid, High Temp. Epoxy Wear Resistant Coating Adhesive
  • 500gm kits of this pourable & brushable epoxy coating that protects surfaces from abrasion and wear. Ceramic BL is used to form a tough, long lasting coating to protect all kinds of components, surfaces and parts. Heat resistant to 180°C.
  • Plastic Metal Ceramic Bl used to protect a pulley-wheel from abrasion
  • Ceramic BL being sprayed
  • Close Up view of Epoxy Resin Ceramic BL Being Sprayed On
  • Heavy Duty Fans coated with Weicon Ceramic BL Plastic Metal
  • How to Make Rubber Moulds with Ceramic BL Plastic Metal
  • Inside of a pipe coated with Epoxy Plastic Metal Ceramic BL
  • Pipe protected with Plastic Metal Ceramic BL
  • Plastic Metal WR and BL for High Abrasion Resistance
  • The range of Weicon Plastic Metal Ceramic BL standard sizes.
$144.47
Inc. GST
$131.34
Ex. GST
Frequently bought together:

Description

  • Extremely wear resistant epoxy coating for metals and other high abrasion surfaces.
  • Liquid, brushable and self-levelling.
  • High heat resistance (180°C) and very good chemical resistance.

Manufactured by Weicon in Germany, our Plastic Metal Ceramic BL is a specialised epoxy coating that is used to line, coat and protect stressed surfaces. Ceramic BL is blue in colour and has a liquid consistency that allows it to be brushed onto surfaces (or sprayed).

Ceramic BL epoxy coating has excellent wear resistance and effectively protects coated surfaces from abrasion across a long service life.

Ceramic BL is made from a specialised type of epoxy resin that is filled with silicon carbide and zirconium silicate. It is a two-part epoxy that must be mixed before use. Once it’s mixed, you have a working pot life of about 40 minutes (assuming 20°C and 200gm mixed).

You can create coatings up to 10mm thick in a single pour with Ceramic BL. After 16 hours the epoxy will be capable of bearing mechanical loads while full cure will take about 24 hours.

Applications for Plastic Metal Ceramic BL

Weicon Ceramic BL Plastic Metal is widely used in numerous industries around the world to protect stressed metal and other surfaces from abrasion. Specific application examples include:

  • The lining of heavily stressed pump housings.
  • Wear protection for slide bearings.
  • Abrasion protection on slides and funnels.
  • The lining and pipes and flanges.
  • Repair of castings, valves and blower fans.
  • For the repair of metal components and the lining of stressed parts in the marine industry (IMPA and ISSA Registered).
  • For lining trays and bins in the mining sector.
  • In apparatus engineering and construction.

Plastic Metal Ceramic BL Wear Resistant Epoxy Dowloands & Resources

Plastic Metal Ceramic BL Specifications.

Basis Mineral Filled Epoxy Resin
Mix Ratio 100 : 15 (Resin / Hardener)
Density of the Mixture 1.8 g/cm³
Viscosity of the Mixture 6,000 MPa
Colour Blue
Maximum Layer Thickness 10mm
Mechanical Strength (50% of Final) 16 Hours (when curing at 20°C)
Final Strength 24 Hours (when curing at 20°C)
Pressure 85 MPa (at 25°C, DIN 53281-83)
Bending Strength 95 MPa (at 25°C, DIN 53281-83)
Mean e-Modul 7,000 - 8,000 MPa (at 25°C, DIN 53281-83)
Shore Hardness 83 Shore D ( (at 25°C, DIN 53281-83)
Shrinkage During Cure 0.02%
Thermoforming Resistance +80°C
Continuous Temperature Rating -35°C to +180°C
Thermal Conductivity 0.7 W/m·K (ISO 8894-2)
Dielectric Strength  15 kV/mm
IMPA Reference Number 75.509.19 (500gm) / 75.509.20 (2kg)
ISSA Reference Number 81 29 37 (500gm) / 81 29 38 (2kg)


Quick Links to Related Categories and Solutions

Browse Our Range of Plastic Metal Ceramic BL
Browse Our Range of Plastic Metal Epoxy Systems
Browse Our Whole Range of Cleaners
Browse Our Whole Range of Solvents & Release Agents
View AllClose

Additional Information

Colour:
Blue
Colour:
500gm
One Part / Two Part:
Two Part
Viscosity:
25,000 mPa·s
Minimum Continuous Temperature:
-35°C
Maximum Continuous Temperature:
180°C
Mechanical Strength (50% of Final):
16 Hours
Full Cure Time:
24 Hours
Density:
1.8 g/cm³
Shore Hardness:
93 Shore D
Composition:
Mineral Filled Epoxy Resin
Max. Layer Thickness:
10mm
Mean Pressure Resistance Strength:
120 MPa (at 25°C, DIN EN 1465)
Food Grade / Potable Water Approvals?:
No
View AllClose